Friday, November 24, 2017

DIY Duster using New Look 6514

"Love yourself.  It is important to stay positive because beauty comes from the inside out."
Jenn Proske

Hope you all had a wonderful Thanksgiving!  I spent most of my week relaxing, planning and counting down the days to my 2 weeks Holiday break.  I have so many sewing projects to finish and I plan to spend at least 1 hour a day to get them done.  This duster is long overdue and was the pattern  (NEW LOOK 6514) selected for the October sew your view with my sew sisters Monica (here)and Felicia (here).

Unfortunately, I am just getting around to finishing and shooting as I lost my sewing mojo for about 3 weeks when my fabric got delayed.  My local post office blamed it on Texas (ship from location) and the next day after I complained, it magically appeared on my doorstep.  I have never had an issue with House of Mami Wata (here) where I get all my beautiful ankara print fabrics. I had it cut for over 3 weeks along with 3 other projects and last Sunday when Monica and Felecia went live (on Instagram), I got off my lazy butt and decided to tackle and finish the project.  It came out amazing and I can't wait to rock it again with boots to an event in December.
The only adjustments I made were the length and sleeves.  I wanted it right above my knees so I measured the pattern and cut.  Most Ankara fabrics are 45 inches wide and due to the fact that I did NOT want another floor length Kimono or duster, I opted to use the width of the fabric for the length.

I decided to make minimal changes to the pattern as most of the views I saw look amazing.  I only made another minor tweak which was adding a cuff with a solid fabric.



1. Measure your arm length.
2. Measure the pattern sleeve length and compare it.  If the pattern is the exact measurement as your length, all you will need to do is remove 2 inches from the length of the sleeve.
3. For me, the pattern sleeve was a bit shorter (1/2 inch) than my arm length. I  would have adjusted it and  add 1/2 inch extra based on my arm length and the pattern for a perfect fit, so I only removed 1.5 inches.
4. Measure the lower width of the sleeve pattern (which is the circumference of your wrist).

(Refer to photo below - NO FLASH so color is a bit distorted)

5. Cut 2 pieces of fabric - 5 inches long times the width of the sleeve pattern (at the bottom).
6. Fold fabric in half, wrong side facing each other and press.( The width is now 2.5 inches - this include 1/2 inch seam allowance).
7. With right side facing pin, stitch folded cuff to sleeves sewing 1/2 inch seam allowance and finish the raw edges.
8. Press seam downwards and then top stitch, stitch in the ditch or close to the seam based on your personal preference.  I opted to double stitch which is totally optional based on style.

Thanks to my beautiful daughter Arielle for capturing these amazing shots.  She has taken over from my son AIDEN and truly enjoys it!

As always, thanks for checking in and stopping by.  Can't wait to create a few more looks for the HOLIDAYS!  I promise NO more kimonos or dusters for the next few months!  I can't wait to share the dresses and a jumpsuit that are currently in the works!!


Read more ⇨

Monday, October 16, 2017

Celebrating Breast Cancer Awareness Month

"We should not give up and we should not allow the problem to defeat us. "

A. P. J. Abdul Kalam

I love Mondays!! Its a new week, a fresh start, a new day to regroup. The month of October we celebrate Breast Cancer Awareness month. To honor the women and men too who have suffered because of this dreaded disease, I wanted to create and wear something PINK to an upcoming event.  My dear friend Primrose (see blog here), has been affected by breast cancer the last 18 months.  She is a fighter and is so determined to beat cancer.

This easy to sew kimono was made using Simplicity 1108 (here) with a rayon crepe challis fabric that I selected for winning the day to night look for the Fabric mart challenge (here).  This was the last piece of pre-cut fabric in this color and I was so happy to grab it.  I chose to rock it with the jeans that I made using Closet Case mid-rise ginger jeans pattern (here)  for the final Fabric Mart challenge!  Yes the Fabric Mart challenge that I won (here).  These jeans fit amazing and I have worn it every single week since. 
Looks peach in the shade!
This kimono pattern will be modified significantly on the next make for my daughter.  I will probably grade the pattern for her (XXS TO XS), shorten it to mid thighs, add belt loops at the side and cut the back piece on fold and remove the 5/8 inch seam allowance.  I will be in sewing overdrive the next week as I have the sew your view and a few makes before my last vacation of the year.
Glasses: from Aldo Shoes ($8)
Shoes:  Ann Taylor 

What would you rock your kimono with?  I can surely rock this again with shorts or a pencil dress.Thanks for stopping and be sure to check back for more DIY and fall projects.  I will be adding a subscription link and making a few changes to the blog so stay tune!

Have a BLESSED WEEK and one love.
Read more ⇨

Monday, October 9, 2017

Simplicity 8172 Kimono- Made for my daughter Arielle

“Her smile makes me smile. Her laugh is infectious. Her heart is pure and true. Above all I love that she is my daughter.”

    Happy Monday All!! It's a NEW week, new challenges and of course a few new sewing projects.  The last few months I have neglected sewing for my daughter as I wanted to develop new sewing skills.  During the month of September, my main focus was the Fabric Mart Fashion Challenge 5 (here).  This challenge was a great life learning experience as I took each challenge as an opportunity to grow.  I developed so many new sewing skills and I am happy to report that I WON with my first handmade pair of jeans! (here).  I also won the Day to Night look right before the finale (here.)
My makes for the Fabric Mart features will focus on more mommy and me looks.  Can you believe my son is even willing to join in?

Now that the challenge is over, my daughter has set aside her list of makes for the year and I will oblige.  She wants kimonos, jogger pants, sweater dresses and of course a peplum top made before her birthday.  The next few weeks I will be in sewing overdrive as she wants 3 handmade looks before November 10th. I am super excited about this new challenge as I will be able to put my $25 monthly fabric selection to good use.

My daughter had picked out a few rayon fabric for kimonos this fall. She wanted a Mommy and me look and we purchased this fabric back in August. Luckily, the XXS in Simplicity pattern S8172 measurements matches her size with little to no adjustments. The culotte seen here was made using McCall 7131 (here) using a different color palette of the same print. 

 She really loved the fabric, the fit and the details of the yellow bias tape.

Side view!

Jeans - Old Navy
Sneaker - Converse

Arielle pretty much has her own sense of style and I truly embrace it.  She picks out her own fabric and makes the final decisions on most of her look.  Thank goodness she is NOT a fan of skimpy clothing so lucky for me I don't have to worry about that!

Back view

I truly enjoy sewing for my daughter because she appreciates every look that I create.  She is one easy going and pretty much appreciates every item that I make for her.

Hair styled using Curly Kids Hair Care Products (Curly Chic LINE)  (here)
You Mane Moisturizer
and Moisture in a Minute

Feel free to leave a comment and let me know what you think.
Thanks for stopping by and have a fabulous week!

Read more ⇨

Wednesday, September 20, 2017

Be Bold, Be Fierce, Be YOU!

From the Boardroom to the Ballroom!

Fabric Mart Challenge - See what the other ladies made! (LINK HERE)

The day to night look was such a bit of a challenge in deciding what I really wanted to create to add to my collection of vibrant colors.  I wanted to create 2 pieces that fits my personal style; one garment that I was familiar with creating and another one that I always wanted to create and had fears.   The idea of creating and  wearing a sweetheart bodice with my love of skirts was ideal for the night look as I could cover with a jacket or cardigan from my closet to wear during the day.  I chose to select vibrant colors that can transition from one season to the next.  I wanted to show versatility omitting the typically greys and dark tones that we tend to wear in the business arena.

The Sweetheart Bodice
I am in love with bodice, bustier and corsets and opted to create a sweetheart bodice with loops to secure the back.  I choose to use a pattern that I purchased on Etsy from craftyalex  shop (here) that I can reuse and modify for future projects.  The pattern is a sweetheart cut line with panels that would work perfect with the off white denim stretch fabric from my stash.  This pattern was so easy to cut as it has 4 pieces, and great visuals with clear easy instructions that I could follow. I watched several YouTube videos before on sweetheart bustier and bodice constructions to learn how to create the case for the  boning and other techniques such as top stitching to have a clean and smooth finish.  I opted to remove the zipper for this project as I plan to wear this bodice over a fitted classic shirt in the future.

Even though this was an easy sew, the bust area curve and loops required careful execution for a smooth clean finish.  The loops and the details in the back took double the time than it took to sew the bodice.  I had prior knowledge working  with loops from a previous project but opted to use the perfect white cording from my stash.  I carefully used my tape (as a placement test for the loops) and the circumference of my sharpie to ensure that each loop had the exact measurement.  I then taped to ensure placement and position and pinned to my dress form before hand stitching all 12 loops.

 This task was extremely tedious as I measured the markings 1 inch apart and then  and used a needle to fully secure before going to the machine to finish the project. I opted to stitch the loop on the inside lining, folding over about ½ inch to close it up and then double stitching to complete the finish. The simplicity cording that I found at Joann Fabrics was absolutely perfect and gave it a beautiful finish.  

I was in limbo about adding more details or creating straps but the beauty and simplicity of the white on the dress form was spectacular with the bold colors from the skirt. Looking back and having worn the bodice all day before the shoot, I would have added boning to all seams to have a more structured look. The instructions only required boning for the front bust area. I noticed that after a while, the denim started to stretch even more than I anticipated. I am very happy with the technique and finish but the next time I create this project, I would consider straps and adding boning in between each panel. I would also add a single piece of fabric to cover the straps in the back.

The Gathered Full Circle Skirt - Ankara Print (Holland/Dutch wax fabric).
I really wanted to use up the last of my ankara print (cotton) fabric that I purchased this past summer in Washington DC on vacation (Thanks Feesewcrafty for taking me to the store!).  I love sewing skirts with bold prints because of its vibrant color palettes and endless possibilities with tops.  The ankara fabric has a lot of structure and is typically used to create hats, blazers, skirts and dresses.  I love the hues as I can wear this skirt both in the fall and spring here in Florida.  I wanted a super full circle skirt so I opted to cut a circle skirt that was double the measurement of my waist and gather it.  

Cutting the circle skirt was a bit of a challenge on my table so I opted to use my floor instead.  I carefully used my tape measure crawling around in a circle and marking with a chalk.  I then used my curve ruler to connect the markings for the front piece.

 Once the front was done, the headache of matching the seams of the prints for the back took a bit of concentration.  Mind you based on the waist measurement that I used, I had to cut 2 pieces on fold and made my life easier but cutting 1 and placing the other on top as both pieces were identical. I was able to use almost 6 yards and did not even have enough left for a skirt for my daughter.

The gathering technique that I choose was using the sewing machine  to create a single loose stitch and changing my settings to stitch length 5 and tension 3 so that it would be easier to gather.  I simply hand gathered the front separate from the back based on my waist measurements and then secured it with a tight stitch before connecting the seams.  I know having a gather foot would have made my life so much easier. The remaining fabric was used create to create a 2.5 inch waistband. I opted to add an extra inch to my waist measurement  as I knew that I will be wearing the skirt with a lightweight sweater or cardigan tucked in. After the skirt was gathered and the waistband was attached, I decided to shorten by cutting 2 inches off. I measures again from the waistband to ensure that the length matched all around.

My Sense of Style and love for Ankara Prints!

Shoes: Steve Madden (here)
Cardigan: NY and Company (here)
Bag: Zara (old)

In am in love with modern day fashion using bold prints and colors with a touch of the '50s intertwined with a bit of '70s flair. This look that I choose to create and style with my cardigan is  oh so perfect for a board meeting and a night out salsa dancing after a wine tasting event. I truly enjoyed creating 2 pieces for this project that is a true reflection of my personal style. I had an amazing time capturing the beauty and flow of this look especially the skirt. I am in love with bold prints that make a statement the minute you walk through the door. The geometric shapes, the pattern details, the colors, the texture and flow is oh so perfect for the transition of my style from day to night.  In closing I will continue to be bold, be fierce, but most importantly, be me!

Amazing SHOTS captured by Michael: Photos by Ernie

Follow him on Instagram (photoernie)

Thanks for stopping by and ONE LOVE!!

Read more ⇨

Wednesday, September 13, 2017

Standing Tall through Irma the Storm - Rocking my Classic Fall Brunch dress

When life throws you lemon, take it and make strawberry L E M O N A D E!

I was so excited to create the pattern as I had made something similar before and it was a HIT.  I contemplated modifying the sleeves and hacking other patterns, adding a unique trim, using a solid color and adding a pieces of my favorite ankara cotton (African Print) fabric until the storm decided to visit my city, Miami, Florida.  Nonetheless, I would NOT allow  mother nature and Hurricane Irma to defeat me and NOT submit a beautiful dress for Challenge 2. 

I planned on standing tall through Irma the storm and would make something classic that depicts my sense of style and submitted it days before the storm hit. I wasn’t quite sure if I had to evacuate to a shelter and did NOT want to wait until last minute just in case I had to leave home on Thursday or Friday. I had less than a day to make it and knew that I  had NO time to run to my local store to get all the bells and whistles needed to make the dress that I had originally had planned in my head.

Fall knit prints are non existent in my stash and I had to settle for this beautiful Scuba Knit that I had purchased at JoAnn Fabrics.  I love cutting into floral prints as I love perfect alignment of colors or pattern details  and felt this was  perfect for fall based on the color palette.   I am definitely planning on wearing this to a BRUNCH in early October that I had planned on attending this past Sunday. I wanted to make sure that my layout was absolutely perfect and that the center would depict the flow of fall flowers from the center neckline to the bottom of the front. Moreover, being  an island girl and a Floridian, fall here is like summer as we wear sandals most time of the year and boots is NOT a big trend unless the temperature drops to the 60s.  

I chose to do view A as it was, classic with a perfect length for transitioning to fall here in South Florida. To top it off, the fit  would show off  just enough of my curves.  I opted to grade the size to accommodate my hips and adjusted it to fit my sense of style.  Modifications were a must to have a clean smooth fitted silhouette. I decided to preserve the beauty of this classic pattern focusing more on the fit and made slight modifications to the sleeves as most of my local family owned fabric stores were closed where I would purchase trimmings.

Pattern Modifications
Graded the size 8 and 10 based on the finished measurement on the pattern (Decided to cut a size smaller as I wanted a more fitted look)
Added 4 inches to the length of VIEW A based on my height to fall right at the knee
Added a BELL sleeve to draw less attention to the hips and to elongate my physique
Bell long sleeves (Doubled the width of the sleeve, gathered it adding more gathers to the center and attached it to the sleeves)


I am happy with the fit, the print and the simplicity of the dress with the modifications of the sleeves.  The dress fits amazing and I loved the  way it turned out even with the challenges that I had to face.  Having been through a few hurricanes (Andrew and Gilbert)  and other life challenges, I have  learned that life still goes on no matter your circumstances may be.  Irma may  have caused the stores to close and may have put a damper in my spirit  but I refused to allow it to get the better of me.  There are so many challenges and setbacks in this world, but I wanted to create my favourite fall dress style using this classic fall print for my upcoming brunch.

Thanks for stopping by and ONE LOVE!!!

Read more ⇨

Tuesday, September 5, 2017

“Rock Star meets Class” 
One Shoulder Classic White Peplum Top

Fashion Challenge 5 - Week 1 - A Blank Slate (here)

TOP: DIY Challenge #1
Pants: New York and Company
Shoes: Steve Madden
Clutch: DIY (my first DIY clutch)

As a sewist who hates to create non-wearable muslin, when I first received my package with 2 yards of it, I wasn’t quite sure what this white muslin was for.  At first, I thought they will probably give us a challenge to create a muslim of a pattern and then use another fabric for the final project.  When I read the challenge “A BLANK slate” I envisioned endless possibilities but one must be creative to bring it to life. I envisioned 2 different looks but the cotton would NOT work based on the style.
TOP: DIY Challenge #1
Skirt: DIY
Clutch - Make up bag from Victoria Secrets

At first, I wanted to make a skirt lined with tulle but felt it would have been way too easy and would not take me out of my comfort level. I have made mainly skirts for almost 3 years and have mastered it.  I went to the drawing board, pinterest, magazines, window shopping and browsed photos of some of my favorite fashion icons including former first lady Michelle Obama.  I spent a day in limbo but after sleeping on it, the year of the drama ruffle sleeves came to mind.  After a day of planning, I knew exactly what I wanted to create.  I wanted to create a fashionable piece that I can wear to classy dinner with a rock star or an event at New York fashion week.

 I wanted to bring out my creative juices and opted to use a 1 shoulder as my base or bodice and add drama to it.  The pattern that I chose was Simplicity 8386 View B as I wanted a fitted look.  I opted to use a piece of white jersey knit that matched perfectly with the muslin fabric.

This took strategic planning as I wanted the front to be appealing and eye catching and HAD to create a true muslin with some other cotton fabric from my stash to determine the length and placement of the ruffle.

The peplum bottom was so much easier than the ruffles as I had a deeper understanding of making self-drafted circle skirt. I opted for mid hip and made a full circle skirt with a finished length of 13 inches.  I first started out with the TUBE base with a one shoulder strap and wanted to see how it would look.  For some reason, it did not bring out the statement of the ruffles the way I wanted it to fall. Again, I went back to the drawing board and I tested it on a different top and found that the asymmetrical worked out perfect.

Bottom Layer Ruffle
I drafted the ruffle pattern to get the right length to cover the shoulder area and leaving an opening for the armpit. I lucked out with my first attempt of 5 inches which sat well on the dress form. I first pinned the paper pattern on my dress form and tried different technique to create the ruffle.  I played with it for at least 15 minutes until it was positioned correctly.   My first attempt was to use one single layer of pellon light to mid weight and 1 layer of fabric, I did NOT get the effect that I envisioned and I then decided to add another layer of pellon and double the fabric for the bottom layer. 

Top Layer Ruffle
I wanted it to be more lightweight to fall perfectly in place with the bottom so I decided on a single layer of fabric on each side and used the flower leftover lining from the peplum lining as my top layer.  I knew at first it would work as the single layer of interface would have been perfect for the fall.  I was amazed the minute I pinned it and definitely will be making another one or something similar for my next Diner En Blanc (all white event)

The Finish - Designer techniques
I ensured that I had a super clean finish by using my bias tape hem on the top layer rather than the serger.  I went into a few top designer stores and checked out their stitching techniques before finishing my garment.  I noticed that lining in most designer garments are common and wanted to make sure that my ruffles and peplum were lined.

I am truly happy with the way it turned out and will be taking more fashion risks during this Challenge and with my upcoming Fall Projects.  Little did I know that “a blank slate” white garment can come to life as simple as it may look with a little bit of sleeve drama.  I love the entire piece and the detachable peplum was just  icing on the cake as I can wear the top without it. I will have multiple use and may use the peplum to jazz up a boring bodycon dress in the future.  I plan to wear this again and again and can’t wait to make the black.

If you need any assistance, feel free to shoot me an email at or leave a comment below.  I will be more than happy to assist.

Thanks for stopping by and ONE LOVE!

Read more ⇨

Monday, August 28, 2017

Falling in Love with Kimonos

 “I love the idea of embracing your curves and loving yourself while expressing it through fashion.” - Hayley Hasselhoff

Its Monday and I am super excited about the finish of this Kimono made using Butterick 6176 (here). Even though cutting and sewing with the sheer chiffon fabric was a challenge, I AM amazed by the finish results. This fabric I found at a local fabric store caught my eyes the minute I walked in but was a headache to cut. After I was done cutting, I noticed I had some mis-cuts as the fabric shifted and I had to cut a smaller size. I literally threw it in my dump pile on last Tuesday  and opted to work my magic this weekend while I was kid free.

Little did I know how perfect the smaller size down would drape.  I started with the medium and ended up cutting a small to fix the zig zag cuts. I had to pin everytime I stitched to avoid the fabric from slipping.  This allowed me to be extra careful and to have a polished finish.

Now as for the added detail! I am loving how the bias tape detail added a little spunk to it.  I opted for a double stitch to give it a more polished look.  This will definitely be one of the go to pieces for the transition to fall.

Look 1: Kimono styled with skinny jeans

High waist skinny denim (old): NY and Company
Tank: Forever 21
Clutch DIY 

Look 2: Kimono styled with a classic pencil skirt and tee

I surely couldn't wait to rock it to work today!

DIY Pencil Skirt using Mimi G tutorial (Scuba Knit fabric)
Tee - Old Navy
Shoes: Zara (old)

I will be rocking this Kimono again this Labor Day weekend and will share my other 2 looks on the beach rocking it with shorts and a pencil dress. I am SUPER EXCITED about this week as it will be my first challenge for the Fabric Mart challenge.

Don't forget to come back to check it out. Also, if you missed the article published in Sunday's Outlook Section of the Jamaica Gleaner "Let It BE", take a minute to read! (HERE) I promise that you won't be disappointed.  IT'S A great  READ!!!

Thanks for stopping by and ONE LOVE!

Read more ⇨